Centralised Lubrication Systems, Hydraulics, Pneumatics And Control

Oil Air Lubrication

Fittings & Acc.

SINGLE LINE LUBRICATION. VOLUMETRIC SYSTEM.

	*Showa MLAW pump.** These models are designed for centralized lubrication systems units utilizing the volumetric type system.		*Showa MLBW pump.** These models are designed for centralized lubrication systems units utilizing the volumetric type system.
	Showa LCA3 Lubrication unit. This lubrication unit combines MLB015W (or 03W) pump with a 4 or 6 liter reservoirs. These lubricators are also designed for a volumetric type system.		Showa LCA4 lubrication unit. The basic LCA4 centralized lubrication unit combines MLB015W (or 03W) pump with 2 or 4 liter plastic reservoir.
	Showa LCB3 lubrication unit. The LCB3 lubrication unit is fitted with a die-casting aluminum 3.4 liter tank, cover and flange. Units with an IC timer can set their operating intervals.		Showa LCB4 lubrication unit. The LCB4 lubrication unit is supplied without IC timer. This unit combines a MLB01W2 pump with 2, 4 or 6 liter tank.
	Showa LCB5 lubrication unit. The LCB5 lubrication unit is supplied with IC timer. This unit combines a MLB01W2 pump with 2, 4 or 6 liter tank.		Showa HP pneumatic lubrication unit. The HPW model is operated by compressed air. Designed for use with oil injectors.
	Showa LAW manual pump. The LAW manual pump is designed for use in a volumetric lubrication system. Oil is dispensed by a pull of the lever.		Showa DPB1 piston distributor. Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. The discharge volumes are 0.03, 0.06, 0.10 and 0.16 cc/stroke.
	Showa DPB2 piston distributor. Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. The discharge volumes are 0.1, 0.2, 0.4 and 0.6 cc/stroke.		Showa DPB2L piston distributor. Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. All models come with visual indicator. The discharge volumes are the same as DPB2 models.
	Showa DPB3 piston distributor. Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. The discharge volumes are 0.2, 0.4, 0.6, 1.0 and 1.5 cc/stroke.		Showa DSA piston distributor. A pre-measured volume is distributed utilizing the power of the internal spring. The discharge volumes are 0.1, 0.2, 0.5 and 1.0 cc/stroke.
	Showa DSAL piston distributor. A pre-measured volume is distributed utilizing the power of the internal spring. All models come with a visual indicator. The discharge volumes are the same as DSA units.		Showa DSB piston distributor. A pre-measured volume is distributed utilizing the power of the internal spring. The discharge volumes are 0.1, 0.2, 0.5 and 1.0 cc/stroke.
	Showa DSBL piston distributor. A pre-measured volume is distributed utilizing the power of the internal spring. All models come with a visual indicator. The discharge volumes are the same as DSB units.		Showa DSZ piston distributor. A pre-measured volume is distributed utilizing the power of the internal spring. All models come with a visual indicator. The discharge volumes are 0.03, 0.05, 0.08 and 0.1 cc/stroke.

c/ Pereda, 28 Pol. Ind. Monsolís 08930 Sant Adrià del Besòs (Spain)

Tel. 00 34 93 4621300

Fax. 00 34 93 4622475

email: neubor@neubor.com